FloppyData is a proxy provider that sells residential proxies on a pay-as-you-go, per-GB basis, and 'floppydata review' searches mostly return pages about PlainProxies and free web proxies rather than FloppyData itself. This review is built on test sessions run on 2026-11-16 against FloppyData proxies, checking median latency, request success, exit geolocation and the network that owns each exit IP, then places the results next to pricing figures from Webshare, IPRoyal and PlainProxies and a short framework for comparing it with Bright Data. It covers what the tests show, what they do not show, and how to run the missing checks yourself before buying.
TL;DR
FloppyData — Fast, stable sessions on consumer-ISP and mobile-carrier IPs, held back by one country-level geo miss in five sessions and no published independent reputation data.
| Pros | Cons |
|---|---|
| Median request latency of 263 to 309 ms across five measured sessions, with every request in those sessions succeeding (20 of 20). | One of five sessions requested for Warsaw exited in Newport, Wales, so country-level targeting is not guaranteed. |
| Exit IPs resolved to consumer ISP and mobile carrier networks (T-Mobile Polska, P4, Virgin Media, EASYNET.PL, Enformatel), not to datacenter hosting ranges. | City-level targeting was loose: a Krosno request exited in Mława and one Warsaw request exited in Rzeszów. |
| Pay-as-you-go pricing billed per GB, so there is no monthly commitment to size against. | One session showed a 1,300 ms worst-case request against a 309 ms median. |
| Connection setup was fast, with a median connect time of 10 to 11 ms in every measured session. | Fraud-score and blocklist results were not part of the test run, so IP reputation is still unmeasured here. |
| Per-GB billing makes costs hard to predict for heavy scraping jobs. |
FloppyData is a per-GB residential proxy provider with a pay-as-you-go plan
FloppyData's pricing page at floppydata.com/pricing lists a Pay as you go plan with residential proxy traffic billed per GB. Current per-GB rates and any trial or refund terms are on that page, and they are worth reading in full before you add funds, because a pay-per-GB model punishes inefficient scrapers and rewards tight request budgets.
The product suits people who want to try a residential pool without a subscription: small scraping jobs, geo-checks of ads and search results, and multi-account setups that run behind an antidetect browser. It suits heavy, predictable workloads less well, where a flat or unlimited-bandwidth plan can turn an unpredictable bill into a fixed one.
Two terms matter for the rest of this review. Rotating residential proxies change the exit IP between requests or at set intervals and are the usual tool for scraping. Static or ISP proxies keep one address for long periods and are the usual tool for accounts that need a stable identity. The sessions tested here held a single exit IP for all 20 requests, so they behave like sticky sessions, and nothing below should be read as a rotation benchmark.
Every measured session completed 20 of 20 requests
In tests run on 2026-11-16, each FloppyData session sent 20 requests through the proxy, and all 20 returned successfully in every session where the full latency run is available. That is a 100% success rate against a reliability threshold of 95%, though 20 requests per session is a small sample and says little about behaviour over thousands of requests.
Six sessions were sampled in total. Five targeted Poland, with Warsaw requested in four and Krosno in one. The sixth resolved to a residential ISP in Irkutsk, Russia (ER-Telecom Holding) and also completed its 20 requests. No session hit a failed request, a timeout or a mid-session IP change.
The limits of this sample are plain. It covers one day, one test location and a handful of exit IPs, and it does not cover high concurrency, long-running sessions, or protected targets such as large e-commerce or social platforms. Treat it as a smoke test of basic health, not a load test.
Median latency ran from 263 to 309 ms across five measured sessions
The five latency runs produced median (p50) request times of 263, 263, 270, 301 and 309 ms. The 95th-percentile times were 282, 343, 309, 516 and 363 ms respectively, and the slowest single requests were 315, 352, 405, 712 and 1,300 ms. Median connect time was 10 to 11 ms in every run.
For browsing and typical scraping, anything under 2,000 ms median is workable, and all five sessions sit far below that. The outlier is the session on a T-Mobile Polska IP, where a 309 ms median and 363 ms p95 coexisted with a single 1,300 ms request. One slow request in 20 is not a pattern, but it is the kind of tail that matters if your scraper uses short timeouts.
The comparison with other providers is limited by method. Other vendors publish response-time figures measured with their own tools and locations, and those numbers are not directly comparable to a 20-request run from a single test point. Run the same probe against any provider you are considering, from the region where your scraper will actually run.
Country-level targeting matched in four of five measured sessions
Four of the five measured sessions exited in the requested country, and one did not. A session requested for Warsaw, Poland exited on a Virgin Media IP in Newport, Wales, United Kingdom, so the automated geo check failed for that session.
City-level accuracy was looser. Two sessions requested for Warsaw exited in Warsaw (one on T-Mobile Polska, one on a P4 network). A third Warsaw request exited in Rzeszów, a city in south-east Poland. The session requested for Krosno exited in Mława, in the north-east of the country. All of these are in Poland, so country-level checks pass, but anyone who needs city-level precision for local search results or pricing checks should expect misses.
The practical consequence is that geo-sensitive work needs a verification step. Resolve the exit IP through two independent geolocation services at the start of each session and discard any session where the result does not match the target. That adds a request and costs a little traffic, and it is cheaper than collecting a day of data from the wrong market.
The tested exit IPs belong to consumer ISP and mobile carrier networks
Every exit IP in the sample resolved to a consumer-facing network operator, not to a hosting provider. The networks reported by IPinfo were AS12912 T-Mobile Polska, AS9141 P4 Sp. z o.o., AS5089 Virgin Media Limited, AS35199 Enformatel Sp. z o.o., AS198389 EASYNET.PL Sp. z o.o. and AS51645 ER-Telecom Holding. Three of the Polish exits sat on mobile carrier networks, which tend to be shared between many users behind carrier-grade NAT and often look cleaner to anti-fraud systems than fixed-line addresses.
Network ownership is only the first layer of reputation. It says nothing about whether a given address has been abused for spam, credential stuffing or scraping before it reached you. No fraud-score or blocklist lookups were part of this test run, so there is no measured reputation figure to report for FloppyData, and any score you may see quoted elsewhere is tied to a different product, method and sample.
A six-check plan fills that gap. First, check each exit IP against the Spamhaus blocklists. Second, look it up on AbuseIPDB for abuse reports. Third, pull an IPQualityScore fraud score. Fourth, check IPinfo's privacy detection, which flags known proxy and VPN ranges. Fifth, compare two geolocation services such as ipwho.is and ip-api.com against the advertised location. Sixth, run a DNS leak test with the proxy configured, to confirm lookups do not bypass it. Run the checks on at least 20 distinct IPs, because single-IP results are noisy.
Per-GB billing makes the rate and the success rate the two numbers to check
FloppyData bills residential traffic per GB, so the real cost of a project is the per-GB rate multiplied by the traffic your scraper actually burns, including failed requests and retries. Read the current rate on floppydata.com/pricing, and check whether the page states a trial, minimum top-up or refund policy. Those terms are not restated here because they can change.
Other providers show how much per-GB rates move with volume. Webshare's pricing page lists rotating residential at $3.50/GB at 1 GB, falling to $1.40/GB at 3,000 GB, billed monthly by plan size. IPRoyal describes its residential proxies as pay-as-you-go per GB with no contracts and traffic that never expires. A low headline rate means little if the plan expires unused traffic or requires a large commitment to reach it.
A fair comparison uses cost per successful page, not cost per GB. Fetch the same 500 URLs through each provider, record total traffic and the number of pages returned without a block or CAPTCHA, then divide. A provider charging twice the per-GB rate can still be cheaper if its block rate is half as high.
Whether FloppyData suits scraping depends on rotation, which this test did not cover
Rotating residential proxies suit scraping and static ISP proxies suit multi-account work, and the FloppyData sessions tested here held one IP, so they say more about account-style use than scraping. Latency and success rate under sticky sessions are encouraging, yet a scraper depends on how the pool behaves as it rotates through thousands of addresses.
For scraping, test four things. Measure the block rate on your actual targets. Measure the CAPTCHA rate per 100 requests. Check how many distinct IPs you get across 1,000 rotating requests, and how many of those repeat. Check how geo-targeting holds up when you request a country on every call.
Search engines other than Google deserve a separate test. Yandex and DuckDuckGo apply their own bot detection, and results can vary with the exit country, so a proxy that works for one target may be challenged on another. Run 100 queries per engine from each target country, record how many return results rather than a challenge page, and confirm the result language and region match the exit IP. No FloppyData result for either engine is claimed here.
FloppyData and PlainProxies are separate vendors with separate sites
The pages that rank for 'floppydata review' are largely about PlainProxies and other services, so they contain no evidence about FloppyData. FloppyData operates at floppydata.com and PlainProxies at plainproxies.com, and nothing in the tests or pricing pages ties the two together.
PlainProxies' own homepage advertises a pool of 25M+ premium residential and datacenter IPs across 195+ countries and a 99.9% success rate on all proxy requests. Those are marketing figures from the vendor and were not tested here. The company has also promoted unlimited residential bandwidth, in contrast to per-GB billing, so check its current pricing page for the exact terms.
The pricing model is the sharpest difference. Per-GB billing, which FloppyData uses, keeps cost proportional to usage and suits light or bursty work. An unlimited-bandwidth plan suits sustained high-volume scraping, but such plans typically come with concurrency limits, fair-use clauses or throttling, so read the acceptable-use terms. A reasonable rule: below a few hundred GB a month, per-GB billing is usually simpler to reason about, and above that, price both models against your measured traffic.
Webshare and IPRoyal are the most direct per-GB alternatives with public pricing
Webshare publishes tiered per-GB rates for rotating residential proxies and also sells static residential (ISP) proxies from $6 a month, priced at $0.30 per proxy. Its free plan gives 10 shared proxies with HTTP and SOCKS5 support, no time limit and no credit card, which makes it the easiest way to sanity-check your tooling before paying anyone. Its weakness for large jobs is that the lowest per-GB rate requires buying a very large monthly volume.
IPRoyal lists residential proxies from a 64M+ pool on pay-as-you-go terms with traffic that never expires, ISP proxies from a 500K+ IP pool, and mobile proxies. Its pricing page shows two different mobile figures, from $10.11 a day in the navigation and from $117 a month in the pricing section, so confirm which applies before buying. Non-expiring traffic is useful for occasional users, and the product range is wider than a residential-only plan.
PlainProxies, covered above, is the alternative to consider if you expect sustained volume and want to compare an unlimited-bandwidth plan against per-GB billing. Bright Data and Oxylabs are the enterprise names most buyers add to a shortlist, usually for very large pools, compliance paperwork and account management. Their price levels and minimums should be read from their own pricing pages, because enterprise terms differ from the pay-as-you-go model discussed here. Decodo, SOAX and NodeMaven are mid-market options worth including in the same cost-per-successful-page test.
Any comparison table published by a vendor that also sells competing products, including antidetect browser makers that resell or recommend proxies, reflects that vendor's own method and commercial interest. Use such tables to build a shortlist, then confirm with your own probe.
Proxies pair with antidetect browsers for multi-account work, and the browser plan matters as well
Residential proxies are usually only half of a multi-account setup, and the other half is a browser profile that keeps cookies, fingerprint and proxy settings together. Gologin supports proxy integration on Windows, macOS, Linux and Android, offers a free plan with 3 profiles that does not expire, and sells a Professional plan at $9 a month for 10 profiles. Its free plan has no profile sharing or team members, which matters for agencies.
1Browser's free plan includes 5 profiles, and its Basic plan costs $6 a month for 10 profiles with 2 GB of proxy traffic included. That bundled traffic can cover light testing, though a scraping project will outgrow 2 GB quickly. Either browser can use any proxy you supply, FloppyData included. The static-style sessions tested here fit that pairing better than a rotating scraping pool does.
Using a proxy is generally legal, but sourcing, consent and your activity decide the rest
Using a proxy server is generally legal in most jurisdictions, but legality depends on how the proxy's IPs were sourced, the target site's terms and what you do through it. A proxy is a standard networking tool, and MDN documents the proxy and tunneling mechanisms in HTTP. Fraud, unauthorised access and violations of data-protection law remain illegal whatever tool is used. This is general information, not legal advice, so consult a lawyer for your own case.
Residential proxy sourcing is the point where ethical and legal risk concentrates, because the IPs belong to real households or devices. Ask any provider, FloppyData included, how its residential IPs are obtained, whether device owners give informed opt-in consent, and how it compensates them. Ask whether the vendor runs identity verification (KYC) on customers, what its acceptable-use policy prohibits, and how it handles abuse complaints. Ask also for a data-processing agreement if you collect personal data. Vague answers are a signal to look elsewhere.
Scraping adds its own questions. Public pages can still be covered by terms of service, copyright or database rights, and personal data may fall under privacy regulation. A proxy provider's compliance statements do not transfer to your use of the data.
FloppyData suits low-cost trials, and compliance-heavy work needs more evidence
FloppyData fits budget-sensitive testers and small teams that want to try residential proxies without a subscription. The tested sessions were fast, completed every request and sat on consumer networks, which is a solid baseline for a pay-as-you-go service. Confirm the per-GB rate and trial or refund terms on floppydata.com/pricing, then start with a small top-up and run the six checks above on your first 20 IPs.
Skip it or delay if you need documented independent benchmarks, city-level geo precision or audited sourcing. One session in five missed the requested country, city-level matches were inconsistent, and no reputation scores were measured here. High-volume scraping on strict targets calls for a rotation and block-rate test on your own URLs before any commitment, and regulated industries should obtain written sourcing and consent documentation from every vendor on the shortlist.
Verdict
FloppyData earns a 7.0 out of 10 for fast, stable sessions on consumer ISP and mobile carrier IPs and a pay-as-you-go model that is cheap to try, with one country-level geo miss in five sessions and no measured reputation data holding the score back. It suits budget-conscious testers and small teams that can verify geolocation per session; buyers who need audited sourcing, city-level precision or proven rotation performance should run their own test first or shortlist larger vendors.
Frequently asked questions
What are the alternatives to FloppyData?
Are FloppyData proxies good for web scraping?
Are PlainProxies good for web scraping?
Are proxy servers illegal?
How much does FloppyData cost per GB?
Does FloppyData offer a trial or refund?
Is FloppyData the same company as PlainProxies?
How many countries does FloppyData cover?
Are FloppyData's IPs residential or ISP/static?
What are the alternatives to PlainProxies?
Sources
Comparisons
-

PlainProxies Alternatives 2026: Top Residential Proxy Providers
-
Gologin vs BitBrowser
-
Gologin vs Octo Browser
-
Gologin vs Dolphin Anty
-
Gologin vs GeeLark
-
Gologin vs NSTBrowser
-
Gologin vs 1Browser
-
Gologin vs SessionBox
-
Gologin vs Incogniton
-
Gologin vs Undetectable
-
Gologin vs AdsPower
-
Gologin vs Multilogin
-
Gologin vs MoreLogin