PlainProxies Alternatives 2026: Top Residential Proxy Providers

Anyone searching for PlainProxies alternatives is really asking two questions: does the vendor's pool and success-rate claim hold up, and what else is worth the money? This comparison puts FloppyData next to PlainProxies and uses Webshare and IPRoyal as the price-transparent benchmarks. We split what each vendor advertises (PlainProxies lists 25M+ IPs, 195+ countries and a 99.9% success rate on its homepage) from what we measured ourselves on 16 November 2026: five FloppyData sessions of 20 requests each. Each section names a winner for one dimension, and where the winner is only the winner on paper, we say so.

At a glance: FloppyData vs PlainProxies

FeatureFloppyDataPlainProxies
Proxy types in this comparisonResidentialResidential and datacenter
Advertised pool sizenot published25M+ IPs
Advertised countriesnot published195+
Success rate100% (100 of 100 requests, five sessions, measured)99.9% (vendor claim)
Median latency263-309 ms (measured)not published
Country match on Poland-targeted sessions4 of 5—
Exit IP behaviour inside a sessionOne exit IP held for all 20 requests—
Billing modelPay as you go, per GBsee vendor pricing
Free tier——

Pool size and coverage: PlainProxies leads on advertised scale

PlainProxies advertises a pool of 25M+ premium residential and datacenter IPs across 195+ countries, which is the largest headline number in this comparison. Those figures come from its homepage and are the vendor's own count; a pool that size says nothing about how many addresses are free for your target country at the moment you connect, and nothing about how often the same address is handed to another customer.

FloppyData does not publish a comparable headline figure in the material behind this comparison, so the scale contest goes to PlainProxies by default. What FloppyData does market is residential coverage across major markets, and the tests below are consistent with that: every Poland-targeted session returned a working residential-class exit within a second.

Coverage claims also drift. Pool counts and country counts on proxy vendors' pages change with marketing refreshes, so treat 25M+ and 195+ as a snapshot taken in November 2026. If you need a specific country, request a test endpoint for that country before buying volume instead of relying on the global total.

One practical consequence: a wide country list helps most when you need many small, scattered locations, such as price checks across dozens of markets. If you need depth in two or three countries, the long tail of 195+ matters much less than how many clean addresses exist in those two or three.

Speed and session stability: FloppyData wins on published measurements

FloppyData completed 100 of 100 requests across five 20-request sessions on 16 November 2026, with median latency between 263 ms and 309 ms. PlainProxies advertises a 99.9% success rate on all requests but publishes no latency figure, so on evidence that can be checked today the point goes to FloppyData.

<table><thead><tr><th>Session (target)</th><th>Exit location and network</th><th>Requests OK</th><th>Median</th><th>95th percentile</th><th>Slowest</th></tr></thead><tbody><tr><td>1 (Krosno, PL)</td><td>Mława, PL, EASYNET.PL</td><td>20 of 20</td><td>301 ms</td><td>516 ms</td><td>712 ms</td></tr><tr><td>2 (Warsaw, PL)</td><td>Warsaw, PL, P4 (Play)</td><td>20 of 20</td><td>263 ms</td><td>282 ms</td><td>315 ms</td></tr><tr><td>3 (Warsaw, PL)</td><td>Warsaw, PL, T-Mobile Polska</td><td>20 of 20</td><td>309 ms</td><td>363 ms</td><td>1,300 ms</td></tr><tr><td>4 (Warsaw, PL)</td><td>Newport, GB, Virgin Media</td><td>20 of 20</td><td>263 ms</td><td>343 ms</td><td>352 ms</td></tr><tr><td>5 (Warsaw, PL)</td><td>Rzeszów, PL, Enformatel</td><td>20 of 20</td><td>270 ms</td><td>309 ms</td><td>405 ms</td></tr></tbody></table>

Each session held one exit IP for all 20 requests, with the gateway connection itself taking about 10-11 ms at the median. That sticky behaviour suits logins and checkout flows, and it is a drawback if you wanted a fresh address on every request without asking for rotation explicitly.

The sample is small. Twenty requests per session, five sessions, one test day and one target region tell you the proxies were responsive, not that they will survive a protected retail site at 50 concurrent threads. The slowest single request in session 3 took 1,300 ms, a reminder that medians hide the tail.

IP type and geo accuracy: FloppyData shows its work, with one clear miss

In FloppyData's five sessions, every exit sat on a consumer-broadband or mobile-carrier network rather than a hosting provider. The networks were EASYNET.PL, P4 (Play), T-Mobile Polska, Virgin Media and Enformatel, as resolved by IPinfo and a second geolocation check. That is the profile a residential proxy is supposed to have, and it is the main reason a residential pool costs more than a datacenter one.

Geo-targeting was imperfect. A session targeted at Warsaw, Poland exited in Newport, Wales on a Virgin Media address, so the country matched in 4 of 5 sessions rather than 5 of 5. A session targeted at Krosno exited in Mława, which is the right country but roughly 300 km from the requested city. If your work depends on city-level accuracy, such as local SERP monitoring, plan to filter or retry exits.

PlainProxies does not publish comparable exit-level data, and the 195+ country claim cannot be audited from the outside. We give this dimension to FloppyData only because its behaviour, miss included, can be inspected; a vendor with a cleaner result that is hidden cannot win it.

Whichever provider you choose, run the same three lookups on a sample of its exits: the ASN and organisation name, the city and country, and whether the address is classed as residential, mobile or hosting.

Safety and trust: five checks to run before paying any of them

Whether PlainProxies is safe depends less on pool size than on whether you can verify five things yourself. The first four checks below work for any vendor, and the fifth applies once you have a trial or small test balance.

<ol><li>A published logging or privacy policy that says what the vendor stores about your traffic. Read the vendor's current policy page; do not rely on a summary.</li><li>A trial, free tier or refund path, so a bad pool costs you minutes and not a month. Webshare, for example, has a free plan with 10 shared proxies and 1 GB of monthly bandwidth, with no time limit and no card required, according to its pricing page.</li><li>A DNS-leak check and an IP classification check, using IPinfo or a similar service, to confirm the exit looks residential, mobile or datacenter as sold.</li><li>A blocklist and abuse check, such as Spamhaus listings and AbuseIPDB complaint counts, on a sample of exits.</li><li>A fraud-score check from a service such as IPQualityScore or Scamalytics. Gologin's own proxy testing treats a Scamalytics score of 40 out of 100 or lower as safe; that is one vendor's benchmark and not an industry standard, so tighten it for sensitive accounts.</li></ol>

On evidence that exists today, FloppyData gets the edge here, because its exits passed the network-type and responsiveness checks above and its single geo miss is documented. For PlainProxies, the 99.9% success claim and the 195+ country claim are the vendor's statements, and checks 1 to 5 are how you convert them into facts. Neither vendor should be paid in volume before the checks pass on a small balance.

Price transparency: Webshare wins for budget, IPRoyal for traffic that never expires

Webshare has the clearest entry pricing of the alternatives. Its rotating residential plan costs $3.50/GB on a 1 GB plan and falls to $1.40/GB at 3,000 GB, billed monthly by plan size. Datacenter proxies start at $2.99/month for 100 proxies, and static residential (ISP) proxies start at $6/month for 20 proxies, or $0.30 per proxy. Its free plan gives 10 shared proxies and 1 GB a month with HTTP and SOCKS5.

IPRoyal sells residential proxies on usage-based pricing per GB, with no contracts and traffic that never expires, according to its pricing page. ISP and datacenter proxies are priced per proxy, Web Unblocker per request, and enterprise plans are custom. Its mobile proxies start from $117/month, though the page also shows a daily rate in its navigation menu, so read the live page before budgeting. The never-expiring balance is the practical advantage over monthly plans if your usage is bursty.

FloppyData lists pay-as-you-go per-GB residential pricing on its pricing page, and PlainProxies' pricing is best read on its live page; both can change without notice. That is exactly why a table of today's prices ages quickly, and why the comparison that matters is cost per successful request, covered next.

Webshare takes this dimension: it publishes a free tier and a full per-GB ladder, and its low end ($1.40/GB at volume) is far below its small-plan rate. Its weakness is the other side of the ladder: at $3.50/GB on the 1 GB plan, a casual user pays two and a half times the volume rate.

Cost per successful request: Webshare wins at volume, but success rate can flip it

The number that decides your bill is the per-GB price divided by the share of traffic that does useful work. A simple formula is: effective cost per GB = listed price per GB ÷ (success rate × share of responses that are usable, not blocks or captcha pages).

An illustration with made-up success rates: Webshare's $3.50/GB at 95% success costs about $3.68 per successful GB, while its $1.40/GB volume tier at 90% costs about $1.56. A pricier provider that actually delivers 99% on your target can still beat a cheaper one delivering 70%, because failed requests burn bandwidth and your time as well.

Measure it directly. Send 200 to 500 requests to your real target through each candidate, record the status codes, count captcha pages as failures, and divide the bandwidth spent by the number of good pages. A 20-request test on a neutral endpoint, like the ones above, measures responsiveness only, not block risk.

On published per-GB figures, Webshare wins the volume tier. FloppyData's reported 100% success rate came from a neutral endpoint and cannot be read as 100% on a protected site, and PlainProxies' 99.9% is likewise a vendor figure. Treat both as upper bounds until your own target test says otherwise.

Datacenter vs residential proxies: residential wins on protected targets, datacenter on cost

Datacenter proxies cost far less per request, and residential proxies are harder for sites to classify as automated. Webshare's published numbers show the gap: 100 datacenter proxies for $2.99/month, against $3.50 for a single GB of rotating residential traffic on its entry plan. Datacenter addresses sit on hosting-provider networks, which many anti-bot systems score as higher risk by default.

Residential addresses come from consumer ISPs and mobile carriers, as the FloppyData exits above did. They carry a better reputation but are slower to source, shared across customers, and usually billed by bandwidth, so a page-heavy crawl gets expensive quickly. ISP (static residential) proxies sit between the two: hosting-grade speed with a consumer-network label, billed per address.

Choose by target tolerance. For public pages with light protection, datacenter proxies are the cheaper tool. For retail, social or ticketing sites that fingerprint network types, residential or ISP proxies are the realistic option, and the cheapest residential per-GB rate is only worth it if the success rate holds. Residential wins this dimension for the targets that matter to most buyers searching for alternatives.

Use-case fit: scraping, SERP monitoring and multi-accounting each have a different winner

Large-scale scraping favours big rotating pools, and PlainProxies' advertised 25M+ IPs makes it the one to test first for that job, provided your own block-rate test confirms the 99.9% claim. Pair it with a per-GB plan you can size down, because the bandwidth bill is the usual surprise.

SERP monitoring depends on location accuracy, and FloppyData's Krosno-to-Mława drift and its Warsaw-to-Newport miss are the reason to be cautious there. For country-level checks on Google, DuckDuckGo or Yandex, its Poland results are adequate; for city-level local results, test each location and keep a retry rule. Here PlainProxies' wider country list gives it the nod on paper, subject to the same testing.

Multi-accounting favours stable, low-fraud-score addresses held for the life of an account, and FloppyData wins this one: its sessions kept a single exit IP across 20 requests on consumer and carrier networks. Webshare's static residential (ISP) plan, from $6/month for 20 proxies, is the cheaper fixed-address route if you prefer one address per account.

The browser matters as much as the proxy for account work. Gologin's Free plan includes 3 profiles with no time limit, its Professional plan costs $9/month for 10 profiles, and it runs on Windows, macOS, Linux and Android with a Cloud Browser, an API and Playwright, Puppeteer and Selenium support. Its Free plan has no profile sharing or team members, so teams need a paid plan. 1Browser's Basic plan costs $6/month for 10 profiles and bundles 2 GB of proxy traffic, which suits a solo user trying a proxy for the first time. With either browser, bring your own residential proxy and test each profile's exit before logging in.

Other names regularly shortlisted include Bright Data, Oxylabs, Decodo, NetNut and Proxy-Seller. Their prices are not quoted here, and per-GB rates for the same provider vary with plan and billing; read each live pricing page and run the cost-per-success test above before choosing.

Who should choose what

Choose FloppyData if: Choose FloppyData if you run multi-account or login-heavy work that needs a stable exit IP on consumer or carrier networks, and you want pay-as-you-go per-GB billing. Budget for retries if city-level geo accuracy matters, since 1 of 5 tested sessions exited in the wrong country.

Choose PlainProxies if: Choose PlainProxies if you need the widest advertised country list and a large rotating pool for high-volume scraping, and you will run your own block-rate and fraud-score tests before committing. Its 25M+ IP, 195+ country and 99.9% success figures are vendor claims, so start with a small balance.

Frequently asked questions

Is PlainProxies safe to use?
Safety depends on checks you can run yourself: a published logging policy, a trial or refund path, DNS-leak and IP classification results, blocklist and abuse checks, and a fraud score. Test a small balance on those five before buying volume, and read the vendor's current policy pages first.
What are the best PlainProxies alternatives for residential proxies?
FloppyData suits sticky-session, multi-account work, with measured median latency of 263-309 ms across five sessions. Webshare has the clearest price ladder, from $3.50/GB on a 1 GB plan to $1.40/GB at 3,000 GB. IPRoyal offers per-GB residential traffic that never expires.
Does PlainProxies offer a free trial?
Check the PlainProxies pricing and FAQ pages for the current trial or refund terms, since they can change. If a free tier is a requirement, Webshare publishes one: 10 shared proxies and 1 GB of monthly bandwidth, with no time limit and no credit card.
Does PlainProxies have a no-log policy?
Read PlainProxies' current privacy or terms page and look for explicit wording on what connection data is stored and for how long. Treat a missing or vague policy as a risk factor, whichever provider you choose.
How many countries and IPs does PlainProxies cover?
Its homepage advertises a pool of 25M+ premium residential and datacenter IPs across 195+ countries. These are the vendor's own figures; ask for test endpoints in the specific countries you need.
Which PlainProxies alternative has the largest IP pool?
On advertised numbers, PlainProxies' own 25M+ IPs is the largest figure in this comparison. FloppyData, Webshare and IPRoyal are compared here on measured behaviour and published pricing, and pool counts are self-reported and not audited.
Are PlainProxies and a free web proxy the same thing?
No. ProxyPal is a separate browser-based web proxy that says its service is completely free and needs no software installation. PlainProxies sells proxy IPs, residential and datacenter, that you configure in a browser, scraper or antidetect profile.
What fraud score is considered safe for a proxy IP?
There is no universal threshold. Gologin's proxy testing treats a Scamalytics score of 40 out of 100 or lower as safe. For accounts you cannot afford to lose, aim lower and check the same IP with a second service such as IPQualityScore.

Sources

  1. PlainProxies homepage
  2. FloppyData pricing
  3. Webshare pricing
  4. IPRoyal pricing
  5. 1Browser pricing
  6. Gologin pricing
  7. Gologin proxy testing methodology and fraud-score benchmark
  8. ProxyPal web proxy
  9. IPinfo
  10. AbuseIPDB
  11. Spamhaus

Comparisons